CARDIO LINE 4000 S/S MED/MED/SP/S SP
CARDIO LINE 4100 S/S MED/MED
Technical and visual modifications as well as misprints reserved -
© 2018
by ERGO-FIT GmbH & Co. KG
9.1.2
CROSS
⊗
Do not apply oil or grease to the external parts of the machine.
9.1.3
CYCLE
⊗
This model is almost maintenance-free.
⊗
The moving parts of the device require no further oiling or greasing.
⊗
Once per week, remove dust from the guide rod of the seat.
⊗
Regularly apply a teflon spray to the guide rod (we recommend “Fin super aerosol”
by Interflon).
Treadle
⊗
As screws tend to loosen over time, you should check the treadles and pedals after
3 to 5 operational hours for the first time, then every month. Note that the left pedal
has a left-handed thread and the right pedal has a right handed thread.
⊗
If a treadle loosens tighten it immediately. Remove the black cap from the crankshaft
and retighten the screw underneath with a 14 mm (1/4 inch) socket spanner. The
pedal may be retightened to the crankshaft with a 15 mm open-end spanner.
9.1.4
MIX
⊗
This model requires very little maintenance.
⊗
Do not apply oil or grease to the external parts of the machine.
⊗
Once per week, remove dust from the chrome bar of the seat.
9.1.5
RECUMBENT
⊗
This model is almost maintenance-free.
⊗
Moving parts need no further oiling or greasing.
⊗
Once per week, remove dust from the guide rod of the seat.
Treadle
⊗
As screws tend to loosen over time, you should check the treadles and pedals after
3 to 5 operational hours for the first time, then every month. Note that the left pedal
has a left-handed thread and the right pedal has a right handed thread.
⊗
If a treadle loosens tighten it immediately. Remove the black cap from the crankshaft
and retighten the screw underneath with a 14 mm socket spanner (1/4 inch). The
pedal may be retightened to the crankshaft with a 15 mm open-end spanner.
8 7
