Technical and visual modifications as well as misprints reserved -
© 2018
by ERGO-FIT GmbH & Co. KG
Operation
Menu „Device“:
⊗
Setting up the
serial number
(serial numbers must only be changed by authorized
ERGO-FIT service personnel or if instructed to do so by an ERGO-FIT employer):
Select the option by touching it. It will be highlighted in blue. Now you can enter the
serial number via the numeric panel.
⊗
Setting up the
product line
:
Here you enter the device type and select the product line (use the arrow buttons
on the right and left side of the scroll bar).
⊗
Selecting the
device parameters
:
Here all adjustment options for this device type are listed. Select an option by
touching it. It will be marked with a little cross.
⊗
Type of incline
setting (TRAC only):
With the arrows to the right and to the left of the scrollbar you can switch beetween
the different types of incline (none, auto, Alpin, Tour,...). We advise you type
„auto“.
⊗
Setting of the
External Data Protocol
:
With the arrows to the right and to the left of the scrollbar you can switch beetween
the different data protocols (dependent on the machine, only wenn an ERGO-FIT
adapter is connected).
Menu „Profiles“:
⊗
Setting the
Timeout in Manual Workout:
Here you can define a timeout in manual workouts in steps of 30 minutes. The
workout stops automatically when the set time has elapsed. Select the setting you
want to change by touching it. It is highlighted in turquoise. You can now increase /
decrease the values by pressing PLUS and MINUS, or you can manually enter
them via the numeric panel (default 0min).
⊗
Cardio minimal incline
settings (TRAC only):
In the cardio mode you can define a minimal incline. The incline cannot fall below
this value. Select the setting you want to change by touching it. It is highlighted in
turquoise. You can now manually enter the value via the numeric panel (default
0%).
⊗
Additional
settings
:
„Transfer manual input parameter“*
1
and „Abbreviate measurement to the next
unit“*
²
may be selected by touching them. The current option is checkmarked.
*
1
This will save the manual parameters for the next session,
*
2
display option, displays „1000m“ instead of „1km“
7 6