Erbe 10128-002, Instruction Manual

Page: 54 / 72

6-6
The unit is equipped with a specific front panel basic setting. The specific basic setting is defined
at the factory and cannot be changed by the user. This specific basic setting only appears if the
basic setting freely programmable by the user is lost due to an error. For the ICC 200 unit, the
following specific basic setting is defined at the factory:
AUTO CUT EFFECT
3
AUTO CUT MAX.WATT 120 watts
ENDO CUT switched on
T-on time 50 ms
T-off time 750 ms
Monopolar SOFT COAG 60 watts
Monopolar FORCED COAG 60 watts
Monopolar ARGON COAG 60 watts
AUTO COAG BIPOLAR 40 watts, AUTO START switched off