ERBAUER 254MM (10”) SINGLE BEVEL SLIDING MITRE SAW
12 Secure work
- Where possible use clamps or a vice to hold the work. It is safer than using your hand.
13 Do not overreach
- Keep proper footing and balance at all times.
14 Maintain tools with care
- Keep cutting tools sharp and clean for better and safer performance.
- Follow instruction for lubricating and changing accessories.
- Inspect tool cords periodically and if damaged have them repaired by an
authorized service facility.
% !
- Keep handles dry, clean and free from oil and grease.
15 Disconnect tools
- When not in use, before servicing and when changing accessories such as blades,
bits and cutters, disconnect tools from the power supply.
16 Remove adjusting keys and wrenches
% / # # $
from the tool before turning it on.
17 Avoid unintentional starting
- Ensure switch is in “off” position when plugging in.
18 Use outdoor extension leads
% 0 !
and so marked.
19 Stay alert
- Watch what you are doing, use common sense and do not operate the tool when
you are tired.
20 Check damaged parts
- Before further use of tool, it should be carefully checked to determine that it will
operate properly and perform its intended function.
- Check for alignment of moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its operation.
- A guard or other part that is damaged should be properly repaired or replaced by
an authorised service centre unless otherwise indicated in this instruction manual.
- Have defective switches replaced by an authorised service centre.
- Do not use the tool if the switch does not turn it on and off.
21 Warning
- The use of any accessory or attachment other than one recommended in this
# $
+DYH\RXUWRROUHSDLUHGE\DTXDOLÀHGSHUVRQ
- This electric tool complies with the relevant safety rules. Repairs should only be
in considerable danger to the user.
