ERBAUER 254MM (10”) SINGLE BEVEL SLIDING MITRE SAW
7. Removing and installing the blade
Warning:
' V
diameter.
$ #
sure the switch is in the OFF position and the
plug is not connected to the power source
socket.
/
Px P 0
operator considers wearing protective gloves
when handling or installing the blade.
Removing blade
1) Unplug the saw from the socket.
2) The slide carriage should be locked in
position by tightening the slide carriage lock
# P
PP
3) Allow the cutting head to rise to the upright
PP
4) Release the lower blade guard by operating
the blade guard handle, and rotate the guard
into its upper position.
V
# P
P
6) Hold the guard in position with your thumb
#
Px
@
sized allen key inserted into the arbor bolt (See
P
until positive location is felt.
? #
undo the arbor bolt with the allen key by
turning it in a clockwise direction.
@ *
machine.
0 *
gently ease the blade from the spindle and
remove downwards and away from the cutting
head.
Note:
Pay attention to the pieces removed,
noting their position and direction they face.
Wipe the blade collars clean of any sawdust
before installing a new blade.
Fig 11
Fig 12
Fig 13
Fig 14
1
1
