Erbauer ERB238MSW, Original Instructions Manual

Page: 33 / 40

ERBAUER 254MM (10”) SINGLE BEVEL SLIDING MITRE SAW
%HYHO0LWUH6HWWLQJV
Settings for standard crown moulding lying
*
Note: The chart below references a
compound cut for crown moulding ONLY
WHEN THE ANGLE BETWEEN THE WALLS
EQUALS 90
o
.
KEY BEVEL
SETTING
MITRE
SETTING
TYPE OF CUT
Inside Corner-Left side
IL xx€
[
31.6
[
Right
1)Position top of moulding against fence
2)Mitre table set at Right 31.6
[
x ƒ
Inside Corner-Right side
IR xx€
[
31.6
[
Left
1)Position bottom of moulding against
fence.
2)Mitre table set LEFT 31.6
[
Outside Corner-Left side
OL xx€ [ 31.6 [ Left
1)Position bottom of moulding against
fence.
2)Mitre table set at Left 31.6
[
x @—|
Outside Corner-Right side
OR xx€ [ 31.6 [ Right
1)Position top of moulding against fence.
2)Mitre table set at RIGHT 31.6
[
x @—|
Fig 42
IL
IR
OL
OR
Inside Corner
Outside Corner
Compound Cut Crown Mouldings