ERBAUER 254MM (10”) SINGLE BEVEL SLIDING MITRE SAW
0 //
blade down to the workpiece to see the cutting
path of the blade
9
#
downward motion.
Finishing a cut:
|
@
parts to stop before moving your hands and
raising the cutting arm.
Before releasing jammed material:
@
0
4. Basic saw operations
Warning:
For your convenience, your
saw has a blade brake. The brake is
not a safety device. Never rely on it to replace
the proper use of the guard on your saw. If
!
seconds, wait for the blade to stop, unplug the
saw and contact customer service.
To turn saw on
} # P
9
trigger switch (2) to turn the mitre saw ON.
Release the trigger switch to turn the saw OFF.
5. Sliding carriage system
1) For chop cutting operations on small
workpieces, slide the cutting head assembly
completely toward the rear of the unit and
tighten the carriage lock knob (1).
x[[
carriage lock knob must be loosened to allow
Before leaving the saw
]
power OFF. Wait for all moving parts to stop.
# # #
Disconnect master switches. Store tool away
/
/
1
1
2
