ERBAUER 254MM (10”) SINGLE BEVEL SLIDING MITRE SAW
6. Mounting the mitre saw
Warning:
$ !
"
' #
and lock the cutting head in the lower position
using the stop latch.
#
the slide carriage lock knob.
# $
designated carrying handles located on the
top of the machine. When lifting, bend at your
knees, not from your back.
]
or by the switch handle. Carrying the tool by
the power cord could cause damage to the
insulation or the wire connections resulting in
#
$ *
visitors to stand near the saw during any cutting
operation.
#
^
Mounting instructions
1) For stationary use, place the saw in the desired
location, directly on a workbench where there
is room for handling and proper support of the
workpiece. The base of the saw has four mounting
holes. Bolt the base of the mitre saw (1) to the
work surface (5),using the fastening method as
/
2) For portable use, place the saw on a
[!
# ^
base of the mitre saw securely to the plywood
using the mounting holes on the base. Use
G-clamps to clamp this mounting board to a stable
# # P[
Note:
Mounting hardware is not included with this
tool. Bolts, nuts, washers and screws must be
purchased separately.
/
/ P[
P
|!
2) Spring washer
3) Flat washer
4) Mitre saw base
5) Workbench
6) Flat washer
7) Spring washer
|!
#
1
2
3
4
5
6
7
8
9
