ERBAUER 254MM (10”) DOUBLE BEVEL SLIDING MITRE SAW
8. Installing Blade
Unplug the mitre saw before changing/installing the
blade.
Note:
Ensure that the saw blade bore is exactly the
correct size for this machine and the diameter does
not exceed 254 mm.
1) Rotate and hold lower blade guard in its upper
position as already described.
2) Install a 254 mm blade with 30 mm arbor, making
sure the rotation arrow on the blade matches the
clockwise rotation arrow on the upper guard and the
blade teeth are pointing downward.
3) Place the outer blade collar against the blade and
on the arbor. Thread the arbor bolt onto the arbour in a
counterclockwise direction. (See ig. 15)
IMPORTANT
Make sure the lats of the blade collars are
engaged with the lats on the arbor shaft.
4) Place the allen key into the arbor bolt.
5) Press the arbor lock, holding gently while turning
the blade counterclockwise. When arbour lock
engages, continue to press it in irmly while tightening
the arbor bolt securely (See ig. 14).
Note:
Do not press arbor lock when blade is moving.
WARNING!
Be sure that the arbor lock
is released so that the blade turns freely.
Lower the blade into the lower table and check
for any contact with the base or the mitre table by
spinning the blade manually. Make sure the collars
are clean and properly arranged. Check that the
lower blade guard is functioning correctly and does
not bind or stick.
Fig 15
