ERBAUER 254MM (10”) DOUBLE BEVEL SLIDING MITRE SAW
12. Adjustable stop plate
A stop plate designed for use during repetitive
cutting is incorporated into the extension arm on the
RH side of the machine base. The stop plate can be
deployed in two positions, inboard and outboard.
The inboard position enables repetitive cuts of
shorter lengths by positioning the stop plate close
to the blade. The outboard position is used for the
repetitive cutting of longer lengths by positioning
the stop at its maximum distance from the blade.
To deploy the stop:
1) Slide the release lock forwards.
2) Pull the stop (1) from its stored position upwards
and to the left. The stop will deploy.
3) Slide the release lock (2) backwards to lock the
stop into position.
4) To stow away, reverse the above steps.
(See ig. 36)
To deploy the stop outboard:
1) Slide the sprung-loaded lock (2) forwards.
2) Whilst holding the release lock, pull the stop (1)
from its stored position upwards and to the right.
The stop will deploy to the outboard position.
3) Slide the release lock (2) backwards to lock the
stop position.
4) To stow away, reverse the above steps.
(See ig. 37)
Adjusting the stop plate
Deploy the stop plate as outlined above.
1) Push the release button (1) on the front of the
machine base below the stop plate.
2) Slide the extension arm (2) from the machine
base, and release the button (1) when at the
approximate required distance.
The extension arm has a micro adjustment facility
for inal positioning.
Turn the adjustment knob (3)
clockwise or counter
clockwise as required for
inal exact positioning of
the stop plate. (See ig. 38)
13. Extension Arm
With the stop plate in its stored position the
extension arm can be used to support long
workpieces. (See ig. 38)
Fig 38
1
2
3
Fig 37
1
2
Fig 36
1
2
