ERBAUER 254MM (10”) DOUBLE BEVEL SLIDING MITRE SAW
Bevel/Mitre Settings
Settings for standard crown moulding lying lat
on compound mitre saw table
Note: The chart below references a
compound cut for crown moulding ONLY
WHEN THE ANGLE BETWEEN THE WALLS
EQUALS 90
o
.
KEY
BEVEL
SETTING
MITRE
SETTING
TYPE OF CUT
Inside Corner-Left side
IL
33.9
0
31.6
0
Right
1)Position top of moulding against fence
2)Mitre table set at Right 31.6
0
3)Left side is inished piece
Inside Corner-Right side
IR
33.9
0
31.6
0
Left
1)Position bottom of moulding against
fence.
2)Mitre table set LEFT 31.6
0
Outside Corner-Left side
OL
33.9
0
31.6
0
Left
1)Position bottom of moulding against
fence.
2)Mitre table set at Left 31.6
0
3)RIGHT side is inished piece.
Outside Corner-Right side
OR
33.9
0
31.6
0
Right
1)Position top of moulding against fence.
2)Mitre table set at RIGHT 31.6
0
3)RIGHT side is inished piece.
Fig 42
IL
IR
OL
OR
Inside Corner
Outside Corner
Compound Cut Crown Mouldings
