Equipment Zone Fast T-Jet 3 User Manual Download Page 102

Page: 102 / 145

Clean the Encoder Strip DAILY

Press the

Ink

button to move the Print Carriage

off of the Capping Station. Manually move the

carriage to the center of the print bed. This will

allow you to clean the Capping Station side of

the Encoder Strip.

You can use foam-tipped swabs, water,

glass cleaner or cleaning fluid, but for best

results use Isopropyl Alcohol Pads. Do NOT use

Rubbing Alcohol pads. Wrap the Alcohol Pad

around both sides of the Encoder strip and move the Pad in both directions. If

the pad becomes black then use a new pad and clean the Encoder strip

again. Press the Ink button again to move the Print Carriage back to the

Capping Station. Clean the rest of the Encoder Strip.

Allow the Encoder strip to AIR DRY.

The Encoder Strip is actually CLEAR with small marks on it. Be

careful to NOT scratch it or the sensor will not read it correctly.

Only use FOAM TIP cleaning swabs or Isopropyl Alcohol Pads when

doing any maintenance or cleaning inside your T-Jet 3.

Clean Capping Station and Wiper Daily

The Capping Station seals the Print Head when it is not in use. Ink residue around

the edge of the Capping Station may keep the head from seating and sealing

properly. This will cause Print Head clogs. Be aware that white ink will build up

faster and thicker than regular colors.

The Capping Station is the rectangular piece onto which the Print Head seats.

Make sure that the outer rubber seal is free from dried ink and garment fibers as

well as the outer edge of the Print Head. Use a foam swab, water, glass cleaner,

cleaning fluid or Isopropyl Alcohol to keep this clean.

Capping Station

Fast T-Jet 3 User’s Manual

Summary of Contents for Fast T-Jet 3


















































































































































Search results

Summary of Contents for Fast T-Jet 3

Reviews:

Related manuals for Fast T-Jet 3

Brands by name

Popular brands

Equipment Zone Fast T-Jet 3, User Manual

Search results

Summary of Contents for Fast T-Jet 3

Reviews:

Related manuals for Fast T-Jet 3

Brands by name

Popular brands