Equipment Zone Fast T-Jet 3, User Manual

Page: 63 / 145

The arrows in this second example
show that the background is set to RGB
255,255,255, making the background
transparent when printing with FastRIP.
Color Management must be turned
OFF before sending the image to print.
Color Management is found in the Print
with Preview window. Go to File > Print
with Preview . For more information
and instructions on how to Print from
Photoshop, refer to Chapter 9 of your
FastARTIST User’s Manual.
Printing from CorelDRAW – Design Setup
When designing in CorelDRAW, set areas where no Underbase is desired as pure
White (RGB 255,255,255 or CMYK 0,0,0,0). To print an area as White, set the area
to a slight tint of off-White (RGB 254,254,254 or CMYK 1,1,1,1).
In this first example, the selected
area is set to CMYK 1,1,1,1, which is
recognized as White and will receive
an Underbase when printed through
FastRIP.
When working with vector images, if you use Named Spot Colors, use the Spot
Color White and FastRIP will create a Highlight White when it prints the Top Color
49
Chapter 4- Printing with the Fast T-Jet 3