Equipment Zone Fast T-Jet 3, User Manual

Page: 122 / 145

Problem:
When you print a White Underbase you get a White box over the entire image.
Causes:
Check your Underbase setup within FastARTIST.
•
Within FastARTIST go to File > FastRIP Setup > Underbase Setup tab.
Make sure the top checkbox that says Underbase All Items with this
Underbase Color is checked . Make sure the bottom check box that
says Highlight All Objects with This Color is NOT checked.
Make sure to view the image in FastRIP’s View Raw Data window to
see if it looks correct BEFORE
printing.
Please note : If you choose a 1440 DPI White Print Mode you will not have the
View Raw Data option.
Problem:
The quality of the printed output is unacceptable when printing bitmap images.
The images seem soft and are not clean and sharp.
The resolution at final size is 72 DPI.
Causes:
The resolution of the image is too low.
Resolution at 72 DPI is for viewing the image on a computer monitor only.
Images intended for printing need to be between 150 and 225 DPI to maintain
a clean and sharp image. You can try upsampling the image to a larger
resolution, but the image still will be “soft” when printed.
Problem:
When sending a print command to the Fast T-Jet 3, the Print Head moves like it is
printing but no ink is dispensed.
Causes:
Ink is not flowing from the Bulk System.
•
Ensure the breather hole in the cap of each ink cartridge has not
108
Fast T-Jet 3 User’s Manual