Equipment Zone Fast T-Jet 3 User Manual Download Page 118

Page: 118 / 145

Windows XP

operating system. The only solution is to re-install the driver.

Too many items may be connected to your USB port

▪

If you have any additional items connected to your USB ports, unplug

everything but the mouse and the Fast T-Jet 3. The USB bus on your

computer only has only a limited amount of power.

The image file may be corrupt

▪

The file being printed may be corrupt. Try another file.

USB cable may be too long

▪

Your USB cable should not be MORE than six feet in length.

Prevention:

Keep it simple. Do not overload the printer port.

▪

When in doubt first try turning everything off and unplugging things such

▪

as the USB cable from the computer to the printer.

Problem:

When printing White ink, no ink prints or there are no Underbase settings

available.

Causes and Solutions:

You do not have the correct printer selected in FastRIP.

Open FastRIP and navigate to

Printers/Manage Printers

and make sure your

printer is setup as a Fast T-Jet 3. If it is NOT setup as a 3, FastRIP

doesn’t know that

it needs to use the White ink.

Problem:

When you send a print job to the printer nothing happens.

Cause:

The computer is not communicating with the printer.

▪

Check the port settings in FastRIP. In the FastRIP window go to

Printers/

Manage Printers

. The port should be set to Epson stylus pro 4800_usb00*.

Check the Control Panel box on the right. Make sure there are no

other jobs already in the print queue.

The printer is not ready to print the job.

▪

Check to see if any of the ink cartridges are showing empty.

104

Fast T-Jet 3 User’s Manual

Summary of Contents for Fast T-Jet 3


















































































































































Search results

Summary of Contents for Fast T-Jet 3

Reviews:

Related manuals for Fast T-Jet 3

Brands by name

Popular brands

Equipment Zone Fast T-Jet 3, User Manual

Search results

Summary of Contents for Fast T-Jet 3

Reviews:

Related manuals for Fast T-Jet 3

Brands by name

Popular brands