Equipment Zone Fast T-Jet 3, User Manual

Page: 32 / 145

Attach the 10. Yellow Ink Cartridge (indicated by the sticker) to the far left
( Yellow ) Ink Line as shown below. This is accomplished by removing the far
left Ink Line from the Ink Line Guide and twisting the two connectors together.
Connecting Ink Lines to the Ink Bottles
Connect the 11. Yellow Ink Line to the Yellow Ink
Bottle. Connectors are color coded to match the
Ink Bottle and Ink Lines easily attached to Ink Bottles
by a basic twist-to-connect system. Please note:
that the White ink bottle uses four connectors.
Once the Ink Line is connected, you must 12.
prime the Ink Cartridge. Locate the syringe
included with your Fast T-Jet Kit and insert it
into the bottom of the cartridge. Slowly draw
the ink from the bottle through the tube and
into the cartridge.
During priming, we recommend you unscrew the top of the Ink
Bottle slightly to dissipate any vacuum that may form during this
process. Ensure you draw ink through the cartridge and into the
syringe to eliminate the possibility of air being trapped in the
cartridge.
Remove the syringe and place the newly filled cartridge into its appropriate 13.
position within the Print Carriage. Each cartridge must be inserted into
its proper position. Use the guide located above the Print Carriage as a
reference.
Fast T-Jet 3 User’s Manual
18