QX5
QXFXO4/QXISDN4/QXE1T1/QXFXS24; (SW Version 6.0.x)
17
QXFXO4/QXISDN4/QXE1T1/QXFXS24 Manual II: Administrator’s Guide
Enable SMS Service
enables the SMS service on the
QX
Gateway
.
User Name
and
Password
text fields require the authentication
settings of the SMS server.
SMS Sender Address
requires the source address for the
QX
Gateway
notification SMS. The address defined in this field will
be seen in the “From” field of the SMS delivered to the mobile
phone.
SMS Recipient Address
requires a destination mobile number
for a test SMS.
SMS Gateway
manipulation radio buttons allow to select
between pre-defined Clickatell SMS gateway and the custom
defined SMS gateways.
Fig.II- 13: SMS Settings page
•
Clickatell
– this selection allows to use a pre-defined SMS gateway. Selection enables the
API ID
text field which indicates a Clicatell specific
parameter obtained from the server and should match on both sides.
•
Custom
– this selection allows to use a custom SMS gateway. Selection requires following parameters to be inserted:
Resource
text field requires the HTTP resource name on the SMS gateway, for example: /http/sms.cgi.
Parameters
text field requires the parameters to be submitted to the resource address. The value of this field represents a string with tokens
(separated by percent (%) symbols) inside. Each token indicates a value of the certain field on this page. The value is dependent on the SMS
gateway requirements. For example:
user=%username%&password=%password%&to=%to%&from=%from%&text=%text%
The tokens are the strings that have the following dependencies from the field in this page:
%username% – indicates the username defined in the field
Username
%password% – indicates the password defined in the field
Password
%to% - indicates the password defined in the field
SMS Recipient Address
%from% - indicates the password defined in the field
SMS Sender Address
%text% - indicates the SMS text generated by
QX Gateway
(event notification, etc.)
Server
text field requires the IP address or the host name of the SMS gateway.
Port
text field requires the port number of the SMS gateway.
Use Secure HTTP
checkbox enables access to SMS server via HTTPS. Checkbox selection enables a
Secure Port
text field that requires the
port number for HTTPS traffic.
Request Method
manipulation radio buttons allow to select the HTTP request method used by
QX Gateway
the access the SMS gateway:
POST
or
GET
.
Send Test SMS
is used to send a test SMS to the defined SMS Recipient Address. This button will be enabled if correct values have been submitted and
saved on this page.
System Security
The
System Security Management
offers a possibility of managing the global security levels.
