QX5
QXFXO4/QXISDN4/QXE1T1/QXFXS24; (SW Version 6.0.x)
105
QXFXO4/QXISDN4/QXE1T1/QXFXS24 Manual II: Administrator’s Guide
Events
System Events
The
System Events
page lists information about system events that have occurred on QX gateway. When a new event takes place, a record is added to the
System Event table. For failure events (priority 2 and 3, see below), the warning “Please check your pending events!” will appear at the upper-right corner
of all management pages.
The system events and the warning message are visible only for the administrator. The warning link, (which leads directly to the
System Events
page)
will disappear from the management pages if the administrator has marked all new events as “read”.
The
System Events
table is the list of new and read system events.
System events have corresponding coloring depending on the
nature of the event: success (priority 1, color green), low
importance failure (priority 2, color yellow), critical failure (priority
3, color red).
The table shows the
Status
of the event (new or read) as well as the
name of the application the event refers to, event description, and
the date when the event was received. For example, if the event was
caused by the IDS service, the
Check IDS
link appears in the
reference row that will lead to the
page, or if the event has
occurred due to incorrect mail sending or SIP registration, the
corresponding links will be seen in the
Reference
column of the
table. The administrator can view the detailed log for each event
that has occurred.
The
System Events
page offers the following components
:
Current System Time
displays the local date and time on QX
gateway.
Mark all as read
marks newly occurred events as “read”.
Reset LED
switches off the flashing LED (if applicable) on the board.
An LED notification may appear (depending on the notification type
given) in the
page when a new event occurs.
Numerous circumstances may cause a certain application on QX
gateway to flag an event.
Fig.II- 163: System Events list
