QX5
QXFXO4/QXISDN4/QXE1T1/QXFXS24; (SW Version 6.0.x)
101
QXFXO4/QXISDN4/QXE1T1/QXFXS24 Manual II: Administrator’s Guide
To Specify an IPSec Connection
1.
Press the
Add
button on the
IPSec Connection Settings
page. The
IPSec Connection Wizard
will appear in the browser window.
2.
Select a VPN
Peer Type
and assign a name to the
IPSec Connection
. Press
Next
to go to the next page of the IPSec Connection wizard.
3.
Enter the remote side IP parameters, check subnets/gateways for the connection, select the NAT traversal option (if needed), and the desired keying
type. Press
Next
to go to the next page of the IPSec Connection wizard.
4.
If the
Automatic Keying
type has been selected, enter the automatic keying parameters and select the PFS and IPSec compression options (if
needed). If the
Manual Keying
type has been selected enter the encryption and authentication keys and SPI(s).
5.
To specify an IPSec connection with these parameters, press
Finish
.
To Manage an RSA key for the IPSec Connection
1.
Press the
RSA Key Management
button on the
IPSec Connection Settings
page. The
IPSec Connection RSA Key
will appear in the browser
window.
2.
Select the RSA key length and press
Generate
to generate a new RSA public key. This may take several seconds.
3.
Enter a destination e-mail address in the
Email this key to peer
text field, then press
Send
to send the new RSA public key.
To Delete/Stop/Start a PPTP/L2TP Connection
1.
Select one or more checkboxes of the corresponding connections that should to be deleted/stopped/started from the
Connections
tables.
2.
Click on the
Delete/Stop/Start
button from the table’s menu to perform the corresponding operation for the selected PPTP/L2TP connection(s).
3.
If deleting, confirm it with pressing on
Yes
. The PPTP/L2TP connection will be deleted. To abort the deletion and keep the PPTP/L2TP connection in
the list, click
No
.
