Epygi QX series Administrator'S Manual Download Page 124

Page: 124 / 151

QX5

QXFXO4/QXISDN4/QXE1T1/QXFXS24; (SW Version 6.0.x)

124

QXFXO4/QXISDN4/QXE1T1/QXFXS24 Manual II: Administrator’s Guide

Get Firmware From Server

The

Get Firmware From Server

page allows you to get a new

Firmware (image) from the FTP server.

Firmware URL

text field requires the path of new firmware image

which located on the FTP server.

Username

and

Password

text fields require the FTP server

authentication parameters.
You should save changes before

Download

Download and

Update

Fig.II- 200: Firmware Update page

Pressing the

Download

functional button a new page with

firmware download process will be displayed.
This page displays non-editable information about the image

validity.

Last Status

shows that firmware download process is

running and whether the new firmware version is downloaded or

not.

Fig.II- 201: Firmware Update page

The

Image Check

field will display “invalid” if the image does not

correspond to the hardware version.
The

Current Software Version

field shows the old software

version. The

New Software Version

field shows the new version

of the software image.
This page needs to be confirmed in order to continue image

updating. If you are sure that the image version is appropriate for

your device press

Update

otherwise press

Discard

If you have confirmed the firmware version, a new page with

firmware update progress will be displayed next. There are no

functions available on this page, just last status about the

firmware update procedure. At some point the connection with

the device is being lost and you need to wait until the firmware

will be burned on the QX gateway.
The

Download and Update

functional button will automatically

download and update the firmware version from the FTP server.
Pressing the

Download and Update

functional button a new page

with firmware download process will be displayed.
This page displays non-editable information about the image

validity.

Last Status

shows that firmware download and updating

process is running.

Fig.II- 202: Firmware Update page

Fig.II- 203: Firmware Update page

Summary of Contents for QX series
























































































































































Search results

Summary of Contents for QX series

Reviews:

Related manuals for QX series

Brands by name

Popular brands

Epygi QX series, Administrator'S Manual

Search results

Summary of Contents for QX series

Reviews:

Related manuals for QX series

Brands by name

Popular brands