Quadro Manual II: Administrator's Guide
Appendix: System Default Values
QuadroFXO; SW Version 5.1.x
106
Parameter
System Default Value
Attendant 00 Settings – Attendant
Scenario
Scenario – default,
Send AA digits to Routing Table – enabled,
Redirection on Timeout – disabled,
ZeroOut – disabled,
Welcome Message – enabled,
Welcome Message, Recurring Attendant Prompt and Attendant Ringing
Announcement – default.
Attendant 00 Settings – SIP
Registration username and password - automatically generated,
SIP server - sip.epygi.com,
SIP Server port – 5060,
SIP Server Registration – disabled.
Attendant 00 Settings – SIP
Advanced
Authentication User Name – undefined,
Send Keep-alive Messages to Proxy – disabled,
RTP Priority Level – medium,
Do Not Use SIP Old Hold Method – disabled,
Outbound Proxy, Secondary SIP Server and Outbound Proxy for Secondary SIP
Server – undefined,
Port for Secondary SIP Server – 5060.
Attendant 00 Settings - Codecs
Codecs - G711u (preferred), G711a, G726/16, G726/24, G726/32, G726/40, G729a,
iLBC – enabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – disabled,
Pass Through FAX – disabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls - disabled.
Universal Extension Recordings
Default, Percentage of System Memory – 1%.
Authorized Phones Database
No entries.
Call Statistics
Enabled, 100 entries for all type of calls,
Automatic Downloading of Call Statistics – disabled.
SIP Settings
UDP and TCP Port – 5060,
TSL Port – undefined,
Realm – quadro,
Session Timer – disabled,
DNS Server for SIP – default,
SIP timers – RFC 3261.
RTP Settings
Properties for all Codecs except iLBC :
Packetization -20ms
Silence Suppression -yes
iLBC properties:
Packetization - 30ms
Silence Suppression – yes
G.726 Standard - ITU-T specification
RTP/RTCP port range - 6000-6099
RTCP Support - disabled
NAT Traversal Settings
NAT Traversal for SIP – Automatic
SIP and RTP Parameters - Use STUN
SIP TCP Port – 5060
STUN Parameters:
Primary STUN Server - stun.epygi.com
Primary STUN Port – 3478
Secondary STUN Server – undefined
Secondary STUN Port - undefined
Polling Interval: 1 hour
Keep-alive interval: 120 seconds
NAT IP checking interval: 300 seconds
No entries in NAT Exclusion table
FXO Settings
6 FXO lines – all enabled, incoming and outgoing calls allowed and routed to 00
Attendant on all.
PSTN Lines Sharing
Provide PSTN lines for master device – disabled.
Gain Control
FXO lines:
Transmit Gain: 0
Receive Gain: 6
Voice Mail:
Transmit Gain: 0
Receive Gain: 0
