Epson WorkForce 1100, Service Manual

Page: 113 / 163

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision C
Disassembly And Assembly Disassembling the Printer Mechanism 113
Confidential

Engage the two tabs of the Front Paper Guide Pad Tray with
the holes of the Front Paper Guide as shown in
Figure 4-125 .

Install the Waste Ink Pad A, B and C in the order shown below.
Figure 4-127. Reinstalling the Waste Ink Pads
 When installing the Waste Ink Pads, make sure not to let the tab
of the Front Paper Guide get caught between the Front Paper
Guide Pad Tray Cover Assy and the Front Paper Guide.
 Confirm that the tab of the Front Paper Guide Pad touches the
Waste Ink Pad A.
Figure 4-128. Reinstalling the Front Paper Guide Pad Tray
Step1
Step2
Step3
Waste Ink Pad A
Front Paper Guide Pad Tray
Waste Ink Pad B
Waste Ink Pad C
Tab
Front Paper Guide Pad
Tray Cover Assy
Waste Ink Pad A

Do not peel off the Front Paper Guide Pad Tray Seal from the
Front Paper Guide Pad Tray Cover Assy. If it is used after once
peeled off or damaged, ink leakage may occur. Make sure to
replace the Front Paper Guide Pad Tray Cover Assy with a new
one when the seal is peeled off or damaged.
Figure 4-129. Handling for Front Paper Guide Pad Tray Seal
 Align the bushing of the Front Paper Guide with the PF Roller
Shaft.
Figure 4-130. The PF Roller Shaft and the bushing of the Front
Paper Guide
Back side
Front Paper Guide Pad
Tray Cover Assy
Front Paper Guide Pad
Tray Seal
Shaft and bushing