Epson SureColor F2100 Series User Manual Download Page 113

Page: 113 / 204

113

Related tasks

Performing a Nozzle Check

Replacing the Head Cleaning Set

Replace the head cleaning set when you see a message on the LCD screen.

Note:

The printer warns you when the head cleaning set is running low. The printer warning system may

not function properly if you do not follow the correct procedure for replacing the head cleaning set.

Turn on the printer.

Press the

maintenance button.

The Maintenance menu appears.

Press the up or down arrow button to select

Head Cleaning Set

, and press the right arrow button to

select it.

Press the right arrow button again.

Press the up or down arrow button to select

Yes

, and press the

button.

The platen and print head move to the maintenance position.

Caution:

Do not move the print head or the platen manually. A malfunction may occur.

Note:

A buzzer sounds after 10 minutes once the platen and print head move to the maintenance

position. Press the

button to continue cleaning. The buzzer sounds again after 10 minutes.

Nozzles can be clogged if more time passes, so finish cleaning as soon as possible.

Replace the parts of the head cleaning set in the following order:

• Wiper unit

• Anti-drying caps

• Flushing pad

Replacing the Wiper Unit and Anti-drying Caps
Replacing the Flushing Pad

Parent topic:

Maintenance

Summary of Contents for SureColor F2100 Series













































































































































































































Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands

Epson SureColor F2100 Series, User Manual

Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands