Epson SureColor F2100 Series User Manual Download Page 141

Page: 141 / 204

141

Caution:

Do not touch the nozzle surface or the parts on the left side of the nozzles with the

cleaning swab. A malfunction may occur.

10. When the area around the print head is clean, remove the tray or paper that you placed on the

movable base.

11. Close the printer cover.

12. Press the

button.

The print head returns to its normal position.

13. Perform a nozzle check.

Parent topic:

Maintenance

Related tasks

Performing a Nozzle Check

Cleaning the Platen Path

If you have problems printing normally, even after performing a head cleaning, clean the platen path to
remove any lint or fibers that have accumulated.

If the platen is not in the forward position, press the

moveable base button to move it forward.

Turn off the printer.

Summary of Contents for SureColor F2100 Series













































































































































































































Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands

Epson SureColor F2100 Series, User Manual

Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands