Epson SureColor F2100 Series User Manual Download Page 138

Page: 138 / 204

138

Cleaning Around the Print Head

Clean around the print head to remove any lint or fibers that have accumulated around the print head
nozzles.

Let the ink cleaning solution soak into a new large cleaning swab.

Turn on the printer.

Press the

maintenance button.

The Maintenance menu appears.

Press the up or down arrow button to select

Cleaning around head

, and press the right arrow

button.

Press the up or down arrow button to select

Yes

, and press the

button.

The platen and print head move to the maintenance position.

Caution:

Do not move the print head or the platen manually. A malfunction may occur.

Note:

A buzzer sounds after 10 minutes once the platen and print head move to the maintenance

position. Press the

button to continue cleaning. The buzzer sounds again after 10 minutes.

Nozzles can be clogged if more time passes, so finish cleaning as soon as possible.

Open the printer cover.

Summary of Contents for SureColor F2100 Series













































































































































































































Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands

Epson SureColor F2100 Series, User Manual

Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands