Epson SureColor F2100 Series User Manual Download Page 135

Page: 135 / 204

135

Caution:

Do not pull on or rub the encoder strip (carriage scale) with too much force, or the right

side may detach or the encoder strip (carriage scale) may be damaged, causing the printer to
operate incorrectly.

Use a dry cleaning cloth to wipe away any ink cleaning solution or dust remaining on the encoder
strip (carriage scale).

Unpack the new air filter and retain the packaging for disposing of the used air filter.

Note:

If you need to clean up any ink inside the printer, use only the cleaning cloth supplied with the

air filter.

Summary of Contents for SureColor F2100 Series













































































































































































































Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands

Epson SureColor F2100 Series, User Manual

Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands