Epson SureColor F2100 Series User Manual Download Page 10

Page: 10 / 204

Introduction to Your Printer

Refer to these sections to learn more about your printer and this manual.

Printer Features
Notations Used in the Documentation
Printer Part Locations

Printer Features

The Epson SureColor F2100 Series printer includes these special features:

High productivity

• High-speed printing using high-density 360 dpi nozzles

• Available 600 ml large-capacity ink cartridges (250 ml cartridges are included with printer)

Reliability

• Built-in White ink circulation system to improve White ink performance and reduce maintenance

• Built-in automatic fabric wiper system automatically cleans the surface of the print head nozzles for

consistent print quality

High Resolution

• UltraChrome DG pigment ink optimized for textile printing for smooth gradations and high color

reproducibility

• High-density white printing using White ink and pre-treatment solution developed specially for Epson

pigment ink textile printers

Easy-to-use setup and operation features

• Easy T-shirt loading and platen height adjustment

• User-friendly design allows you to perform all everyday operations from the front of the printer and

check operating status through the transparent printer cover

• Large, easy-to-read, color LCD display

• PC-free, direct printing from a commercially available USB 2.0 memory device connected to the

printer

• Easy-to-use Garment Creator software

Optional Equipment and Replacement Parts

Summary of Contents for SureColor F2100 Series













































































































































































































Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands

Epson SureColor F2100 Series, User Manual

Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands