Epson SureColor F2100 Series User Manual Download Page 119

Page: 119 / 204

119

13. Pull the lever forward as shown, and install the new anti-drying cap, placing the holes in the anti-

drying cap over the posts on the printer.

14. Close the printer cover.

15. Press the

button.

16. Press the up or down arrow button to highlight

Yes

, and press the

button.

17. Press the

button again to move the print head to the flushing pad replacement position.

Parent topic:

Replacing the Head Cleaning Set

Related references

Optional Equipment and Replacement Parts

Related tasks

Replacing the Flushing Pad

Replacing the Flushing Pad

Replace the flushing pad after replacing the wiper unit and anti-drying caps included in the head cleaning
set.

Summary of Contents for SureColor F2100 Series













































































































































































































Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands

Epson SureColor F2100 Series, User Manual

Search results

Summary of Contents for SureColor F2100 Series

Reviews:

Related manuals for SureColor F2100 Series

Brands by name

Popular brands