Epson Stylus Pro 7500, Reference Manual

Page: 20 / 184

1-10
The Control Panel
Printer Setting menu (PRINTER SETTING MENU)
This menu allows you to make various settings which change the
operation of the printer.
PLATEN GAP (Platen gap adjustment)
Normally, leave this set to AUTO . If the printed image is smeared,
select WIDE .
PAGE LINE
Select whether page lines are printed on the roll paper.
The Print Page Line operation changes according to the Auto Cut
settings as shown.
Note:
When the Sheet light is on, the Print Page Line setting is not available.
Roll Auto Cut light Print Page Line Printer’s Operation
On On Prints page line on the
right side only, and cuts
paper automatically
after the print job.
On Off Cuts paper
automatically after the
print job.
Roll Cutter Off light Print Page Line Printer’s Operation
On On Prints page lines on the
right side and below the
document.
On Off Does not print page lines
or cut.