Epson Stylus Pro 7500, Reference Manual

Page: 126 / 184

6-4
Troubleshooting
COVER OPEN Lower cover is
open. Close the lower cover.
Start printing again
from the beginning for
best results. Otherwise
misalignment or
banding may appear
on the printed image.
PAPER NOT CUT
f Paper Out
Roll paper was not
cut. Cut the paper
manually, then remove
the cut paper from the
printer. When RELOAD
PAPER is displayed,
load paper.
Cut paper did not
fall off. Remove the cut paper
from the printer. When
RELOAD PAPER is
displayed, load paper.
PAPER NOT
STRAIGHT
f
Paper Out
Slippage occurred
and paper was fed
at an angle. Reload paper. See
“Paper Feed or Paper
Jam Problems Occur
Frequently” on page
6-16.
RELOAD PAPER
f Paper Out
Paper could not be
reversed into the
printing position. Remove then reload
the paper so that the
right and bottom
edges are straight and
in line with the rows of
punch holes on the
printer. See “Paper
Handling”.
Paper is set out of
the printable area.
Paper is set out of
the horizontal
cutting area.
Paper is not fully
ejected. Cut the paper at the
paper insertion slot,
then reload paper.
PAPER NOT CUT
error was cleared. Reload paper.
SECURE PAPER
LEVER
o
Paper Out
Paper set lever was
released during the
printing process or
another operation. Pull the paper set lever
all the way up. Start
printing again from the
beginning for best
results.