Epson Stylus Pro 5000, Service Manual, Page: 86 / 780

Stylus Pro5000 Chapter4 Assembly and Disassembly
Rev.A
4-10
4.2.5.2 Paper Guide Assembly, Cover Removal
1. Remove “Housing Upper”. (See section 4.2.1)
2. Remove “Housing Front Unit”. (See section 4.2.2)
3. Remove the mechanism. (See section 4.2.3)
4. Push hard “Paper Guide Assembly, Cover” toward right or left direction
releasing it from the protrusion at the side you pushed, and remove
“Paper Guide Assembly, Cover” from the mechanism.
(Refer to Figure4-16)
CAUTION
When removing “Paper Guide Assembly, Cover”,
do not lose a plain washer and “U” shaped spring
washer; a plain washer and “U” shaped spring
washer come off from right side.
"Paper Guide Assembly, Cover"
"U" shaped spring washer
(leaf spring)
Plain washer
Figure 4-16. Paper Guide Assembly, Cover Removal
CHECK POINT
9
Since the “U” shaped spring washer has a
determined direction to be installed, install the
washer so that concave side of the spring washer
faces to the “Assembly Cover” side. (See figure 4-
17)
P a p e r G u i d e A s s e m b l y , C o v e r
F r a m e A s s e m b l y , M i d d l e , L e f t
P l a i n W a s h e r
" U " s h a p e d S p r i n g W a h s e r
Figure 4-17. Installation of Spring Washer