Epson Stylus Pro 5000, Service Manual, Page: 127 / 780

Stylus Pro5000 Chapter4
Rev. A 4-51
CHECK POINT
9
In the condition that phase of “Hopper
Transmission Gear Assembly” is made correctly,
as it is shown in Figure4-95, in the inside of
“Frame, Assembly, Middle, Right”, the protrusion
of “Cam Assembly, Paper Return” should be
inserted into the ditch of “Lever, Paper Return,
Cam” and also 5 paper return levers should be
sticking out.(Refer to Figure4-95 and Figure4-96)
11. Hang “Timing Belt, Hopper” on the “Combination Gear, 18.144,24”.
(Refer to Figure4-97)
Ditch
Protrusion
"Cam, Assembly,
Paper Return"
"Lever, Paper
Return, Cam"
Figure 4-95. Frame Inside After Matching Phase of "Hopper Lock
Transmission Gear, Assembly"
Paper Return Lever should be
sticking out.
Figure 4-96. Paper Return Lever After Making Phase of "Hopper Lock
Transmission Gear Assembly"
"Timing Belt, Hopper"
"Combination Gear,18.144,24"
Figure 4-97. Setting "Timing Belt, Hopper"