2-14
Using Roll Paper
Note:
❏
If you want to print more data on the same sheet of paper, press
the
z
roll paper button and send the next print job. The paper
will return to the printing start position before starting the next
print job.
❏
You must press the
z
roll paper button; otherwise, the printer
will not operate even if you send a new print job. However, do
not press the
z
roll paper button more than is necessary;
repeated motion may damage the printout.
2. Cut the paper along the printed line. Never pull the paper as
you cut it. Doing so may damage the printout. When cutting
the paper, do not cut inside the line (closer to the printer) as
this may cause paper feed problems.
Note:
EPSON recommends that you use a triangle or other tool to ensure
that the end of the roll is cut perpendicularly. A diagonal cut may
cause paper feed problems.
3. Once you have cut the paper, hold down the
z
roll paper
button for about 3 seconds. The paper feeds in reverse to a
position where it can be easily removed from the sheet feeder
at the back of the printer. If it does not feed to this position,
repeat this step.
4. Gently remove the paper. Then, press the
z
roll paper button
to clear error light.
Your document has now been printed.
