manualshive.com logo in svg

Epson Stylus Photo 890, User Manual, Page: 14 / 241

Share
Download
Epson Stylus Photo 890 User Manual Download Page 14

Safety Instructions

6

When using the printer

Observe the following when using the printer:

❏

Do not insert objects through the slots in the printer’s cabinet.

❏

Take care not to spill liquid on the printer.

❏

Do not put your hand inside the printer or touch the ink 
cartridges during printing.

❏

Do not move the print head by hand; otherwise, you may 
damage the printer.

❏

Always turn the printer off using the 

P

power button. When 

this button is pressed, the 

P

power light flashes briefly and 

then goes out. Do not unplug the printer or turn off the power 
to the outlet until the 

P

power light stops flashing.

❏

Before transporting the printer, make sure that the print head 
is in the home (far right) position and the ink cartridges are 
in place.

When handling the ink cartridges

Observe the following when handling the ink cartridges:

❏

Keep ink cartridges out of the reach of children. Do not allow 
children to drink from or otherwise handle the cartridges.

❏

Be careful when you handle the used ink cartridges, as there 
may be some ink remaining around the ink supply port. If ink 
gets on your skin, wash the area thoroughly with soap and 
water. If ink gets in your eyes, flush them immediately with 
water. If discomfort or vision problems remain after a 
thorough flushing, see a doctor immediately.

❏

Do not shake an ink cartridge; this can cause leakage.

Summary of Contents for Stylus Photo 890


















































































































































































































































Reviews:

No comments