Epson Stylus Photo 875 DC Manual Download Page 175

Page: 175 / 212

Troubleshooting

9-17

All lights are off

Try one or more of these solutions:

❏

Press the

power button and make sure the printer is on.

❏

Turn off the printer and make sure the power cord is securely
plugged in.

❏

Make sure your outlet works and is not controlled by a wall
switch or timer.

Lights came on and then went out

The printer’s voltage may not match the outlet rating. Turn off the
printer and unplug it immediately. Then, check the printer labels.

If the voltage does not match, DO NOT PLUG YOUR PRINTER
BACK IN. Contact your dealer.

Only the power light is on

Try one or more of these solutions:

❏

Turn off the printer and computer. Make sure the printer’s
interface cable is securely plugged in.

❏

Make sure there is no packing material in the printer.

❏

Turn off the printer and computer and disconnect the
printer’s interface cable. Then print an operation check page.
See “Running a printer operation check” on page 9-6.

If the check page prints, make sure the printer software and
your application software are installed correctly.

❏

If you’re trying to print a large image, your computer may not
have enough memory to print. Try printing a smaller image.

Summary of Contents for Stylus Photo 875 DC





















































































































































































































Search results

Summary of Contents for Stylus Photo 875 DC

Reviews:

Related manuals for Stylus Photo 875 DC

Brands by name

Popular brands

Epson Stylus Photo 875 DC, Manual

Search results

Summary of Contents for Stylus Photo 875 DC

Reviews:

Related manuals for Stylus Photo 875 DC

Brands by name

Popular brands