Epson Stylus Photo 875 DC Manual Download Page 104

Page: 104 / 212

4-10

Using the Printer Software for Macintosh

4. Select the Print Quality setting.

5. Make other settings as necessary. For details, see online help.

Note:

❏

The

PhotoEnhance

option under Color Management only

affects images, not text or graphs. For example, if

Monochrome

is selected from the Tone list (enabled when

PhotoEnhance

is selected), only the images in a document

will be printed in monochrome. Any colored text or graphs in
the same document will be printed in color.

❏

Some settings may be unavailable depending on the Print
Quality, Media Type, and Ink settings you make.

6. Click

to apply your settings and return to the Print dialog

box. Click

Cancel

to return to the Print dialog box without

applying your settings. To save your Advanced settings, see
the next section.

Saving and deleting your settings

To save your Advanced settings, click

Save Settings

in the

Advanced dialog box. The Custom Settings dialog box appears.

Type a unique name (up to 16 characters) for your settings in the
Name box, then click

Save

. Your Advanced settings will be added

to the Custom Settings list.

You can save up to 10 different custom

settings.

Summary of Contents for Stylus Photo 875 DC





















































































































































































































Search results

Summary of Contents for Stylus Photo 875 DC

Reviews:

Related manuals for Stylus Photo 875 DC

Brands by name

Popular brands

Epson Stylus Photo 875 DC, Manual

Search results

Summary of Contents for Stylus Photo 875 DC

Reviews:

Related manuals for Stylus Photo 875 DC

Brands by name

Popular brands