Epson Stylus Photo 875 DC Manual Download Page 116

Page: 116 / 212

4-22

Using the Printer Software for Macintosh

If you only want to print a few of the panels without printing the
entire poster, click

Panel Selection

, then click the panels you

don’t wish to print, and then click

. Only the panels that you

did not click will be printed.

Previewing your printout

The Preview feature allows you to see how your document will
look before actually printing it. Follow these steps to preview
your document.

1. Make your printer driver settings.

2. Click the

Preview icon button in the Print dialog box. The

button changes into a

Preview

button.

Note:

Use the

Preview icon button to switch between the

Print,

Preview, and

Save File modes. Click the icon to select the

mode you want. For information on the Save File mode, see “Saving
print data in files” on page 4-24.

Overlapping Panels

Slightly overlaps the images so that they can
be aligned more precisely.

Summary of Contents for Stylus Photo 875 DC





















































































































































































































Search results

Summary of Contents for Stylus Photo 875 DC

Reviews:

Related manuals for Stylus Photo 875 DC

Brands by name

Popular brands

Epson Stylus Photo 875 DC, Manual

Search results

Summary of Contents for Stylus Photo 875 DC

Reviews:

Related manuals for Stylus Photo 875 DC

Brands by name

Popular brands