Epson Stylus Color 200 User Manual Download Page 41

Page: 41 / 133

Installing a Driver for DOS Programs

Most DOS software programs include drivers for EPSON
ESC/P 2



printers. If the Stylus COLOR 200 driver is not listed

in your software, choose the first printer available in the lists
below. Also check with your software manufacturer to see if a
Stylus COLOR 200 driver is available or is included with a new
version of your software.

When printing in color as well as black and white, select:

LQ-860
LQ-2550

When printing black and white only, select:

LQ-870/1170
LQ-570(+)/1070(+)
SQ-870/1070
LQ-850
LQ-500

Note:
These drivers let you use your printer but do not support some
features, such as 720 dpi and MicroWeave.

2-8

Installing and Using the Printer Software

Summary of Contents for Stylus Color 200






































































































































Search results

Summary of Contents for Stylus Color 200

Reviews:

Related manuals for Stylus Color 200

Brands by name

Popular brands

Epson Stylus Color 200, User Manual

Search results

Summary of Contents for Stylus Color 200

Reviews:

Related manuals for Stylus Color 200

Brands by name

Popular brands