8. Press down the ink cartridge clamp until it locks in place.
You will feel some resistance.
c
Caution:
Once you install an ink cartridge, do not open the ink
cartridge clamp again or remove the cartridge except to
replace it with a new one. Once you remove a cartridge, do
not reuse it; you may damage the print head.
9. Press the
Load/Eject
button again to return the print head
to its home position. (Even if you do not press
Load/Eject
,
the print head moves back to its home position about
60 seconds after you close the clamp.)
The printer charges the ink delivery system for about two
minutes. During this time, the
Power
light flashes. When
the printer is finished charging, the
Power
light stays on.
c
Caution:
Never turn off the printer while the
Power
light is
flashing.
1-10
Setting Up the Printer
