Epson SC-B7000 Series, Service Manual

Page: 26 / 144

SC-F7000 Serie/SC-B7000 Series Revision A
PRODUCT DESCRIPTION Control Panel 26
Confidential
Maintenance
Nozzle Check Print
Prints the check patterns. Check them visually and execute head cleaning
when blurring or space can be seen.
Cleaning
All Nozzles
Execute (Light),
Execute (Medium),
Execute (Heavy) Checks the pattern numbers which blurring or space can be seen in their check
patterns. Selects all lines or the nozzle lines including the numbers, then
executes head cleaning. When this is set to [All Nozzles], executes head
cleaning for all nozzles. When [Selected Nozzles] is selected, selects nozzle
lines and executes head cleaning only for them. Select the cleaning level from
[Execute (Light)], [Execute (Medium)] or [Execute (Heavy)]. Select [Execute
(Light)] at first. When blurring or space can be seen even though [Execute
(Light)] is executed, select [Execute (Medium)]. When blurring or space can
be seen even though [Execute (Medium)] is executed, select [Execute
(Heavy)].
Selected Nozzles
Execute (Light),
Execute (Medium),
Execute (Heavy)
Maintenance
Head Maintenance Head Movement
Moves the Print Head to the maintenance position. Make sure to execute
Move Head before washing the Wiper, Cap or Print Head. Moving the Print
Head manually causes Print Head failure.
Waste Ink Counter Execute
Resets Waste Ink Counter in this setting, after emptying the Waste Ink Bottle.
Resets Waste Ink Counter only when emptying the Waste Ink Bottle. Doing
not so results in incorrect display for disposal period of the waste ink.
Print Logs
Print Job Log Sheet Print
Prints the information about the print job (up to 10 jobs) stored in the printer.
The used amount of the media and ink are printed for every print job. You can
see the usage of the consumables.
Show Total Prints XXXXXX m 2 (XXXXXX ft 2 ) Indicates the total printed area (up to 6 digits).
Printer Status
Print Status Sheet Print
Prints the list of current Printer Setup status, product life or periodic
replacement parts status. You can check each piece of information at once.
Firmware Version XXXXXX,X_XX,XXXX Displays the firmware version of the printer.
Network Setup
IP Address Setting
Auto
Sets the IP address, the subnet mask and the default gateway manually.
Panel
IP: XXX.XXX.XXX.XXX
SM: XXX.XXX.XXX.XXX
DG: XXX.XXX.XXX.XXX
Print Status Sheet Print Prints the list of current Network Setup.
Restore Settings
Yes
Returns the set values of Network Setup menus to their factory default.
No
Table 1-15. Setup Menu
Menu Menu Item/Setting Values (shaded one is the default) Explanation