Epson SC-B7000 Series, Service Manual

Page: 106 / 144

SC-F7000 Serie/SC-B7000 Series Revision A
ADJUSTMENT CR Related Adjustments 106
Confidential
13. Load the user's media to the printer.
14. Select the following menu items from the control panel.
Media Setup Customize Settings 0 RIP Settings
15. Set [1.5] in Platen Gap .
16. Set [0.2mm] in Head Alignment and press the [OK] button.
17. Select [Manual (Bi-D)] and press the [OK] button, then the adjustment pattern will
be printed.
18. Confirm the adjustment result (the pattern with the fewest printed lines) is around
"4".
19. Input the numbers selected in Step 18 and click the [OK] button to confirm it in all
the entries in the same way. When all entries are complete, the printer goes back to
"Ready".
20. Select the following menu items from the control panel.
Media Setup Customize Settings 0 RIP Settings
21. Set [2.0] in Platen Gap .
22. Set [0.2mm] in Head Alignment and press the [OK] button.
23. Select [Manual (Bi-D)] and press the [OK] button, then the adjustment pattern will
be printed.
24. Confirm the adjustment result (the pattern with the fewest printed lines) is around
"4".
25. Input the numbers selected in Step 24 and click the [OK] button to confirm it in all
the entries in the same way. When all entries are complete, the printer goes back to
"Ready".
Figure 4-3. Adjustment Pattern
C1
1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7
1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7
M1 Y1 BK1
C2 M2 Y2 BK2
1
C1
2 3