Epson SC-B7000 Series, Service Manual

Page: 20 / 144

SC-F7000 Serie/SC-B7000 Series Revision A
PRODUCT DESCRIPTION Control Panel 20
Confidential
LCD
† Display Description
Figure 1-10. LCD
Table 1-14. LCD
Name Function
1 Message
Printer status, operating status, or an error message is
displayed.
2 Media information
†
From left to right, shows the selected media number,
platen gap, media width, and media remaining.
†
If a media setting bank number created with this printer is
selected as the print media, the number (from 1 to 30) will
be displayed. When [RIP Settings] is selected, 0 will be
displayed.
†
The icon of platen gap changes depending on the setting
value as shown below.
: 1.5
: 2.0
: 2.5
†
The media remaining is not displayed if [Off] is selected
for [Remaining Setup] in the [Media Remaining] menu.
1
2
3
4
3 Chip unit status
The status of the chip unit is indicated as follows.
Ready to print.
An error occurred.
The chip unit could not be recognized or it is not
compatible with the printer. Or, the slider is not
locked.
The chip unit requires replacement.
4 Waste ink bottle status
The status of the wasted ink bottle is indicated as follows.
No problem
Almost full
Full
Table 1-14. LCD
Name Function