Epson RC700 Manual Download Page 336

Page: 336 / 340

4. Troubleshooting (EtherNet/IP)

324

RC700 / RC90 Option Fieldbus I/O Rev.14

3. Overall device diagnostics

View the diagnostic information on a device in the configuration by selecting the

node which corresponds to the device.

IP Address

IP address of the device.

From

How the IP address of the device was obtained:

from the configuration
from the DNS server (IP address of the device has been resolved)

Requests

Number of requests.

Requests / s

Number of requests per second.

Useful bytes

Number of useful data bytes.

Useful bytes / s

Number of useful data bytes per second.

Connections

Number of connections created for this device.

Time-out errors

Number of time-outs received for this device.

Frame errors

Number of frame errors for this device.

Refusal errors

Number of errors excluding time-out and frame errors.

Summary of Contents for RC700




















































































































































































































































































































































Search results

Summary of Contents for RC700

Reviews:

Brands by name

Popular brands

Epson RC700, Manual

Search results

Summary of Contents for RC700

Reviews:

Brands by name

Popular brands