Epson ME100, Service Manual

Page: 77 / 135

EPSON Stylus CX1500/ME100 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 77
4.3 Disassembly
The flowchart below shows step-by-step disassembly procedures. When disassembling each unit, refer to the page number shown in the figure.
Figure 4-1. Disassembling flowchart
START
“4.3.1 Document Cover” (p.78)
“4.3.3 Panel Unit” (p.80)
“4.3.4 Panel Housing” (p.81)
“4.3.5 Scanner Unit” (p.82)
“4.3.6 Housing Upper” (p.86)
“4.3.7 Main Board Unit ” (p.87)
“4.3.11 PS Board Unit ” (p.93)
“4.3.8 Housing Middle” (p.89)
“4.3.16 Holder Shaft Unit” (p.100)
“4.3.2 Stacker” (p.79)
T
To remove the “PS Board Unit”, all parts shown in
the green box need to be removed.
T
To remove the “Housing Lower (Inner)”, all parts
shown in the red box need to be removed.
T
To remove the “Ink System Unit”, all parts shown
in the blue box need to be removed.
“4.3.10 Housing Lower (Outer)”
(p.92)
“4.3.17 Print Head” (p.103) “4.3.9 ASF Unit” (p.90) “4.3.12 Front Frame” (p.94) “4.3.14 CR Motor” (p.96)
“4.3.15 Paper Guide Upper” (p.98)
“4.3.18 Waste Ink Pads ” (p.105)
“4.3.20 PF Motor” (p.108)
“4.3.19 Housing Lower (Inner)”
(p.106)
“4.3.21 Ink System Unit” (p.109)
“4.3.13 EJ Roller” (p.95)