Epson ME100, Service Manual

Page: 104 / 135

EPSON Stylus CX1500/ME100 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 104
V
External View (2)
Figure 4-46. Print Head Removal (2)
8. Disconnect Head FFC from the connector of CSIC Board.
9. Peel off Head FFC secured to the hook (x1, ) of Holder Shaft Unit and
Main Frame by the double-sided tape.
Head FFC
Double-sided tape
Hook
T
If Carriage Unit is disassembled or replaced with a new one,
make sure that Timing Belt is set in the assembling groove
correctly as following figure.
T
Apply THREE BOND 1401 (Part Code:1091654) to the Timing
Belt insertion part after inserting Timing Belt.
A D J U S T M E N T
R E Q U I R E D
After replacing Holder IC with a new one, always apply oil G-58 to
the specified portions.
T
Refer to Chapter 6, Figure 6-12 (p.120)
A D J U S T M E N T
R E Q U I R E D
T
When having replaced Print Head, implement the adjustment in
the following order. (Refer to Chapter 5 “ADJUSTMENT”)
1.
Initial ink charge
2. Head ID input
3. Bi-D adjustment
T
When having removed and reinstalled Print Head, implement
only the following adjustment.
1.
Head cleaning
2. Bi-D adjustment
Glue