Epson ME100, Service Manual

Page: 83 / 135

EPSON Stylus CX1500/ME100 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 83
V
External View (2)
Figure 4-9. Scanner Housing Upper Removal
T
Scanner Housing Upper Removal
1. Remove the screws (x2, ) for securing Scanner Housing Upper.
2. Release the hooks (x1, ) for securing Scanner Housing Upper, and then
remove it upwards from front side of scanner.
V
External View (3)
Figure 4-10. Scanner Carriage Unit Removal (1)
T
Scanner Carriage Unit Removal
1. Move Scanner Carriage Unit to the center.
2. Slightly lift CIS Unit from Scanner Carriage Frame.
3. After peeling off double-sided tape that secures Scanner Carriage FFC,
disconnect from CIS Unit connector, and remove CIS Unit.
C A U T I O N
T
Perform the following steps in a location free of dirt and dust.
A clean room or clean bench is preferred.
T
Do not damage Document Glass of Scanner Housing Upper.
Scanner Housing
Upper
Document Glass
Hook
C.P.F 3x8 TBD
(4±0.5kgfcm)
C A U T I O N
Do not damage Rod Lens Array when removing / installing it.
Figure 4-11. Handling of CIS Unit
Align the hooks (x2, ) of CIS Unit with the notches (x2) of Scanner
Carriage Frame.
Figure 4-12. Installation of CIS Unit
Scanner Carriage Unit
CIS Unit
Double-sided tape
Scanner Carriage
Frame
Rod Lens Array
Hooks