Epson ME100, Service Manual

Page: 26 / 135

EPSON Stylus CX1500/ME100 Revision A
PRODUCT DESCRIPTION Control Panel 26
1.5.3.2 Maintenance Operation
Nozzle check pattern print
V
Condition
Press Ink maintenance button with Power button to turn on this unit
V
Function
T
Nozzle check pattern is printed standalone.
T
Remaining ink quantities of each color are printed.
T
Enter Idle mode after printing completed.
The example of nozzle check pattern is below.
Figure 1-11. Nozzle check pattern
Paper size exchange mode
V
Condition
Press B&W (Color) Start button with Media Select button at the same time
V
Function
T
Paper Size selection is change to A4/4"x6" (Letter/4"x6") mode.
T
Confirm the setting by flushing all LEDs once.
NOTE: Only valid in idle state.
1.5.3.3 Service Operation
The ink overflow counter can be reset using the steps below.
1. Number of copies button with Power button-ON
T
Enter to maintenance setting mode.
T
Make all LED turn on for 1 second.
T
The contents of initialization when each button is pressed are shown in the
Step 2.
T
Return to the mode if the button other an in the Step 2 is pressed.
2. B&W start button is pressed more than 3 seconds and less than 10 seconds.
T
Reset ink overflow counter while in maintenance mode.
<Cyan>
<Magenta>
<Yellow>
<Black>
Firmware
version
Waste ink
counter