Epson ME100, Service Manual

Page: 120 / 135

EPSON Stylus CX1500/ME100 Revision A
MAINTENANCE Overview 120
Figure 6-10. Lubrication
Figure 6-11. Lubrication
Figure 6-12. Lubrication
Figure 6-13. Lubrication
<Lubrication Point>
1. Shaft of Driven Pully
2. Sockets of Driven Pulley
Holder
<Lubrication Type>
1. G-58
2. G-58
<Lubrication Amount>
1.
φ
1mm x 2 points
2.
φ
1mm x 2 points
<Remarks>
1. Use a injector to apply it
2. Use a injector to apply it
<Lubrication Point>
PF Roller and EJ Roller on upper
side of Front Frame
<Lubrication Type>
G-58
<Lubrication Amount>
1mm x 308mm x 2 points
<Remarks>
• Use a brush to apply it
• Make the height of the grease
and lubrication amount the same
on both the PF Roller side and
EJ Roller side.
Driven Pully
Driven Pully Holder
PF Roller side
Front Frame
EJ Roller side
<Lubrication Point>
Bottom channel of Holder IC
<Lubrication Type>
G-58
<Lubrication Amount>
φ
1mm x 1 point
<Remarks>
• Use a injector to apply it
• Slide Carriage Unit to center and
lubricate.
<Lubrication Point>
1. Teeth the EJ Gear
2. Socket on Main Frame
<Lubrication Type>
1. G-58
2. G-58
<Lubrication Amount>
1.
φ
1mm x half around
2. Adequate dose
<Remarks>
1. Use a injector to apply it
• Rotate lubricated teeth to
lower side.
2. Use a injector to apply it
Carriage Unit
Holdr IC
Holdr IC
EJ Roller
EJ Gear