Epson ME100, Service Manual

Page: 106 / 135

EPSON Stylus CX1500/ME100 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 106
4.3.19 Housing Lower (Inner)
V
External View
Figure 4-49. Housing Lower (Inner) Removal
V
Part/Unit that should be removed before removing Housing Lower (Inner).
Document Cover / Stacker / Panel Unit / Panel Housing / Scanner Unit /
Housing Upper / Main Board Unit / Housing Middle / Housing Lower (Outer) /
ASF Unit / PS Board Unit
V
Removal procedure
1. Remove the screws (x3, ) for securing Housing Lower (Inner).
2. Release the hooks (x2, ) for securing Cap Unit, and then insert the rib (x1,
) of Cap Unit into the slit of Main Frame.
3. Release the hook (x1, ) for securing Printer Mechanism by using a flat-
blade screwdriver, and then remove Printer Mechanism by lifting upward.
Handling Position
Housing Lower (Inner)
Hooks
Cap Unit
Hook
C.B.P 3x8 F/Ni
( TBD )
Slit
Rib
C A U T I O N
Hold the designated position and lift Printer Mechanism upward
when performing the following step in order to prevent warping of
Main Frame.
When assembling Housing Lower (Inner), be sure to set the tip of
Ink Tube in the correct position of Housing Lower (Inner).
Otherwise it will cause ink leakage.
Figure 4-50. Tip of Ink Tube setting position