Maintenance and Troubleshooting
95
Options
When you use the cut-sheet feeder, the paper does not feed
properly
When you switch between single sheets and continuous
paper, the printer beeps three times and the
PAUSE
light
comes on.
Cause
What to do
You may have tried to
change the paper release
lever position while paper
remained in the printer.
Return the paper release lever to the
previous position and eject the paper.
Then change the paper release lever
position.
The paper does not feed.
Cause
What to do
The cut-sheet feeder may
be incorrectly installed.
Reinstall it as described on page 98.
The paper release lever
may be in the wrong
position.
Check that the paper release lever is
pushed back to the single-sheet position.
You may have loaded too
many sheets in the bin.
Remove some sheets.
Paper may be jammed near
the print head.
Look for a paper jam.
The edge guide positions
may be incorrect.
Position the edge guides at the diamond-
shaped guide marks.
There may be only one
sheet left in the bin.
Add more paper.
